RM2,710.00
Radial Engineering TONEBONE Bassbone V2 Bass Preamp & Boost
Price RM2,710.00
Brand Radial Engineering
Size (L x W x H) 29.5 cm x 6.5 cm x 12 cm
Availability In Stock
Quantity
Description
Highlight
  • Two-channel bass preamp for 1 or 2 basses
  • Shared effects loop with footswitch
  • Variable clean boost circuit and EQ controls
  • PZB booster and piezo input for upright bass
  • Built-in Radial DI with balanced output for the PA

The Bassbone V2™ is a two channel bass preamp with a number of customizable features to suit any type of setup or playing style, while providing superb audio quality ideal for a live stage or studio recording.

 

 

 

 

 

SPECIFICATIONS

Audio circuit type: . . . . . . . . . . . . . . . . . . Discrete class-A FET input with low noise ICs.

Frequency response: . . . . . . . . . . . . . . . 20Hz ~ 18kHz

Total harmonic distortion: . . . . . . . . . . . . 0.05% @ -15dBu

Intermodulation distortion: . . . . . . . . . . . 0.2% @ -20dBu

Dynamic range: . . . . . . . . . . . . . . . . . . . 85dB

Input impedance: Input A: . . . . . . . . . . . 220K

Input impedance: Input B: . . . . . . . . . . . 220K/10M

Output impedance: . . . . . . . . . . . . . . . . . 300 Ohms at XLR

Maximum input: . . . . . . . . . . . . . . . . . . . +7 dBu

Gain:. . . . . . . . . . . . . . . . . . . . . . . . . . . . Unity gain device

Gain-boost drive: . . . . . . . . . . . . . . . . . . 0 to 25 dB

Noise fl oor: . . . . . . . . . . . . . . . . . . . . . . -100dB

Equivalent input noise: . . . . . . . . . . . . . . -92dBu at XLR

HPF-2 high pass fi lter: . . . . . . . . . . . . . . Flat, 35Hz and 60Hz (6 dB/Octave)

XLR confi guration: . . . . . . . . . . . . . . . . . Pin 2 +, Pin 3 -, Pin 1

Ground Ground lift: . . . . . . . . . . . . . . . . . . . . . . . Lifts pin-1 on the XLR

Power: . . . . . . . . . . . . . . . . . . . . . . . . . . +15VDC/400mA adapter included

Construction: . . . . . . . . . . . . . . . . . . . . . 14 gauge steel

Finish:. . . . . . . . . . . . . . . . . . . . . . . . . . . Powder-coat

Size: (L x W x D). . . . . . . . . . . . . . . . . . . 5.5" x 4.2" x 2" (203 x107 x 48mm)

Weight: . . . . . . . . . . . . . . . . . . . . . . . . . 2.55lb (1157 grams)

Conditions: . . . . . . . . . . . . . . . . . . . . . . . Use in dry locations only between 5°C and 40°C