RM3,490.00
DPA Microphone d:fine 66 Dual-Earhook Omni Headworn Microphone
Price RM3,490.00
Brand DPA Microphones
Size (L x W x H) 26 cm x 16 cm x 8 cm
Availability In Stock
Quantity
Description
Highlight
  • Pristine audio quality
  • Easy single-ear or dual-ear mounting
  • Minimal visual impact
  • Adapts to all pro wireless systems

Perfect for performers in motion, the d:fine omni headset mic, d:fine 66, uses a sturdy, comfortable dual-ear headset that is available in black, brown or beige. The 4066 capsule is optimized for high speech intelligibility, low distortion and humidity resistance and can be mounted on booms of 90 or 110 mm lengths. Designed for professional use, the connector splits the cable from the microphone boom allowing for quick swapping of broken cables and/or wireless connectors. An optional high boost grid is available.

DPA Microphones Headset Microphone Features

Directional characteristics
Omnidirectional
Principle of operation
Pressure
Cartridge type
Pre-polarized condenser
Frequency range
20Hz-20kHz
Soft boost grid (+/-2dB): 20Hz-20kHz, 3dB soft boost at 8-20kHz
Optional High boost grid (+/-2dB): 20Hz-20kHz, 10dB boost at 12kHz
Sensitivity
Nominal +/- 3dB at 1kHz: 6mV/Pa
-44dB re. 1V/Pa
Equivalent noise level
A-Weighted:
Typical: 26dB (A) re. 20½Pa
Maximum: 28dB (A)

ITU-R BS.468-4:
Typical: 38dB
Maximum: 40dB
S/N ratio
(A-weighted) re. 1kHz at 1Pa (94dB SPL): Typ. 68dB(A)
Total Harmonic Distortion (THD)
<1 % up to 123dB SPL peak
<1 % up to 120dB SPL RMS sine
Dynamic range
Typical: 97dB
Max. SPL
Peak before clipping: 144dB
Output impedance
From MicroDot: 30-40Ohms
From DAD6001-BC: 100Ohms
Cable drive capability
Up to 984' / 299.93m with DAD6001-BC XLR adapter
Output balance principle
Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio (CMRR)
> 60dB from 50Hz to 15kHz with DAD6001-BC XLR adapter
Power supply
For wireless systems: Min. 5V through DPA adapter
Current consumption
Typ. 1.5mA (microphone)
3.5mA with DAD6001-BC XLR adapter
Connector
Microdot termination
Polarity
+V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Temperature range
-40 to 45 deg. C / -40 to 113 deg. F
Relative Humidity (RH)
Up to 90%
Tags: dpa headset