Price | RM3,230.00 |
Brand | DPA Microphones |
Size (L x W x H) | 25 cm x 15 cm x 10 cm |
Availability | In Stock |
Quantity |
|
- CORE by DPA technology inside
- Supercardioid condenser microphone
- Handles high SPLs
- Superior gain-before-feedback
- Flexible and easy mounting
- Gentle and easy to mount on the instrument
- Detachable cable and a versatile gooseneck extender
Trumpet, trombone and other brass
The 4099 CORE for Extreme SPL is perfect for trumpet, trombone and other brass instruments that can make a lot of sound. You can use it with or without mute. The microphone effortlessly handles even the highest sound pressure levels.
An innovative mounting mechanism makes it easy to move the microphone between instruments with just one hand. The microphone and its mounting system are both designed and optimized for the brass family. This ensures that the best mounting and audio reinforcement is achieved when performing live.
Choose a 4099 CORE Instrument Microphone for Brass (4099-DC-2-199-T) for your trumpet, trombone and brass in general.
Directional characteristics : Supercardioid
Principle of operation : Pressure gradient
Cartridge type : Pre-polarized condenser
Frequency range : 20 Hz to 20 kHz
Frequency range, ± 2 dB, 20 cm (7.9 in) distance : 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
Sensitivity, nominal ± 3 dB at 1 kHz : 6 mV/Pa; -44,5 dB re. 1 V/Pa (High SPL: 2 mV/Pa; -54 dB re. 1 V/Pa)
Equivalent noise level, A-weighted : Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) (d:vote High SPL: Typ. 28 dB(A) re. 20 μPa (max. 31 dB(A))
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) : 71 dB (High SPL: 66 dB(A))
Total Harmonic Distortion (THD) : <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine (High SPL: <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sine)
Dynamic range : 100 dB (High SPL: 95 dB)
Max. SPL, peak before clipping : 142 dB (High SPL: 152 dB
Output impedance : From MicroDot: 30 to 40 ohm; from XLR adapter: 100 ohm
Cable drive capability : Up to 300 m (984 ft) with XLR adapter
Output balance principle : Signal balanced with XLR adapter
Common Mode Rejection Ratio (CMRR) : > 60 dB from 50 Hz to 15 kHz with XLR adapter
Power supply (for full performance) : Min. 5 V to max. 50 V through DPA adapter for wireless systems, 48 V phantom power +/- 4 V with XLR adapter
Current consumption : Typ. 1.5 mA (microphone). 3.5 mA with XLR adapter
Connector : MicroDot
Color : Black
Dimensions : Microphone weight: 46 g (1.62 oz) Capsule diameter: 5.4 mm (0.2 in) Microphone length: 45 mm (1.8 in) Cable length: 1.8 m (6 ft)
Polarity : Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on XLR adapter)
Temperature range : -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH) : Up to 90%
Gooseneck length : 140 mm (5.5 in)
Sensitivity selection tolerance (at 1 kHz) : ± 1 dB